BARRY 230V SX Automatic road barrier complete with rod and foundation base

The BARRY by PROTECO is an innovative road barrier that is supplied in a kit complete with rod and foundation base. The special feature is the compact size and the fact that the pole is telescopic. This allows it to be stretched up to 6 meters in length and to cover a minimum gap of 3.6 meters.

The barrier body on the head also contains the LED flashing light so it is not required to put another one to signal the movement. The included control panel also includes the radio receiver for the remote controls of the PROTECO.

The barrier is provided on the left when viewed from the outside, as in the figure you find in the product images. The direction of the barrier cannot be changed and therefore must be ordered right or left as needed.

The 230V motor is able to achieve up to a maximum of 250 daily cycles, so the barrier can also be used in small condominium contexts with up to 20/30 cars passing through the gate.

The BARRY also includes an obstacle detection system that can be programmed in sensitivity through a special trimmer.

The control unit allows the connection of a magnetic loop (using a special metal mass detector not supplied), photocell inputs and wired controls.

What exactly does the BARRY 230V barrier kit from the PROTECO include?

• Road barrier (number 1 in the picture)
• Telescopic pole 3.6-6 m (number 4 in the picture)
• The LED flashing light (the number 2 in the picture)
• Ground anchor set

What are the features of the BARRY of the PROTECO with 230V motor?

• Power supply: 230V
• Motor power: 230V
• Motor power: 200W
• Max power consumption: 1.5A
• Opening time: 6 sec
• Automatic reclosing: settable from 1 to 60 sec
• Maximum rod length: 6 m
• Accessory power supply: 12Vdc 8W
• Operating temperature: -20° +50 °C
• Radio Frequency: 433MHz ANGIE Compatible
• Degree of protection: IP44
• Number of cycles per day: 250